2 Watt FM Transmitter

The circuit is basically a radio frequency (RF) oscillator that operates around 100 MHz. Audio picked up and amplified by the electret microphone is fed into the audio amplifier stage built around the first transistor. Output from the collector is fed into the base of the second transistor where it modulates the resonant frequency of the tank circuit (L1 coil and the trimcap) by varying the junction capacitance of the transistor. Junction capacitance is a function of the potential difference applied to the base of the transistor T2. The tank circuit is connected in a Hartley oscillator circuit.

Components List

R1=220K R2=4.7K R3,R4=10K R5=100ohm

C1,C2=4.7uF Electrolytic C3,C4=1nF C5=2-15pF C6=3.3pF

Q1=BC547C Q2=BD135 P1=25K MIC=Electret Condenser Type

P1 act as condenser microphone volume level. For FM, coil will be small. Use thin gauge enamel magnet wire. the diameter of coil will be a couple mm: use ink tube from pen to form, and try 8-12 turns. Small inductance coils make for much guess work.

reff : http://kumpulanrangkaianelektronik.blogspot.com/2012/03/2-watt-fm-transmitter.html

Video yang berkaitan dengan 2 Watt FM Transmitter